Panel repair · Wichita & Sedgwick County · 67219
Park City mixes stick-built housing from the 1960s onward with a substantial number of manufactured homes. Those follow completely different service and bonding rules, and it is worth telling us which you have when you call.
15 min
Typical arrival
67219
Park City zip
Yes
Manufactured home services
$0
Travel charge in Sedgwick County
Park City is fifteen minutes from the yard and produces a broader range of panel work than a single Wichita neighbourhood does, because the housing types inside the city limits differ so much from one street to the next.
Stick-built housing here mostly dates from the 1960s to the 1980s, with the boards and service ratings of that period. Manufactured homes are a different system altogether: the service equipment usually sits on a pedestal outside the home, feeding a distribution panel inside, and the grounding and bonding arrangement between the two is where the faults concentrate.
That connection is the single most common thing we are called out to on manufactured homes. It sits outdoors, it takes weather, and it was frequently made once and never inspected again.
Yes, and it is worth asking any contractor that before booking, because plenty decline it. The service, feeder and bonding requirements are genuinely different from a stick-built house, and a repair approach borrowed from one does not transfer to the other. Tell us the home type on the phone and the right truck arrives with the right parts.
Roughly fifteen minutes from N Hydraulic Street. Standard bookings take the next free slot. A panel that is warm, buzzing or smells burnt moves into the same-day slot, and there is no travel charge anywhere in Sedgwick County.
Park City is in Sedgwick County, so MABCD handles it from 271 W 3rd St N, Suite 101 in Wichita on (316) 660-1840. A like-for-like breaker swap needs no permit. Panel replacement, service work, pedestal equipment and any meter work do, inspected against the 2023 National Electrical Code, enforced since January 1, 2025.
Park City sits directly north of Wichita inside Sedgwick County, along the I-135 corridor.
Reviews
★★★★★
Zinsco panel in a manufactured home, which apparently nobody wants to touch. They did. Explained why the breakers can weld to the bus, replaced the board and the feeder connection, and had the inspection done inside a week. Bethany kept me updated on the permit without me chasing.
Charlene D.Park City
★★★★
Good work and a fair price on a subpanel for the shop. Only reason it is not five is that the Evergy scheduling added a week nobody could really control. They did warn me that would happen upfront, so it was not a surprise, just a wait.
Wes P.Northeast Wichita
Yes. Manufactured homes have their own service, feeder and bonding requirements, and the pedestal to home connection is where most of the faults sit. Not every electrician takes this work, so it is worth confirming before you book anybody. Mention the home type when you call and we will bring the right parts.
Because it lives outdoors. Rain reaches enclosures whose seals have hardened, condensation forms inside them, and corroded terminations lose contact pressure long before anything looks wrong from the front. Heat follows loss of contact, and that is what shows on a thermal reading.
No. Park City is inside Sedgwick County and is treated as standard coverage. Typical arrival is about fifteen minutes from our yard, and the same-day slot for hot, humming or burning panels applies exactly as it does inside the city.
Look for what did not come back after power was restored. A dead circuit, an appliance that will not start, a breaker that will not hold, or a panel that hums or feels warm. Surge damage reaches devices, circuits and the service entrance, and only one of those three is visible to you.
Give us the street and the name on the panel door. You will get the next slot running in this area, and a same-day one if the board is hot, humming or giving off any smell.