Coverage
Electrical panel repair across Wichita and Sedgwick County: College Hill, Riverside, Delano, east and west Wichita, Derby, Andover, Haysville and more. (316) 616-4692.
Andover, Augusta and Rose Hill are in Butler County. We cover all three on the same pricing with no travel charge, but the permit route is different there, issued by the city rather than by MABCD. We confirm it before starting rather than assuming.
2 areas
| Area | ZIP | Typical arrival |
|---|---|---|
| Northwest Wichita | 67205 | 25 min |
| West Wichita | 67212 | 30 min |
Reviews
★★★★★
1920s house, fuse box still in service, and an insurer who had finally noticed. They converted it to a modern breaker panel, handled the MABCD permit and the inspection, and gave me a written record I could send straight to the underwriter. No back and forth.
Imani R.Delano
★★★★★
Home inspector flagged double-tapped breakers on our sale. I expected a big number. It was an hour of work and a small invoice, and he re-labelled the whole panel schedule while he was in there without me asking. Sale went through clean.
Doug K.West Wichita
★★★★★
Rust inside the panel from a leak we never knew about. Rather than just cleaning up the terminations, Curtis traced where the water was getting in at the mast and fixed that first. Told me straight that repairing the panel without stopping the water would have bought me a few months.
Priscilla A.East Wichita
★★★★★
Breakers had been tripping for months and two other electricians replaced them without fixing anything. Turned out the bus stabs had lost their grip so nothing was seating properly. That is the board, not the breakers. Replacement was the right call and he showed me why rather than telling me.
Byron T.Derby
★★★★
Solid job on a service upgrade. Detailed quote, no surprises on the invoice, permit and inspection all handled. Four stars only because the first appointment slipped a day for an emergency ahead of me, though they did call rather than leave me sitting there.
Selena V.Haysville
★★★★★
They knew Andover permits go through the city rather than MABCD, which the last contractor I called clearly did not. Small thing, but it meant the paperwork was right first time instead of bouncing. Panel work itself was tidy and the schedule was labelled properly at the end.
Marcus H.Andover
Every area
Give us the street and the name on the panel door. You will get the next slot running in this area, and a same-day one if the board is hot, humming or giving off any smell.